|
T-18-8M, T-18-8R, T-18-8-BG |
|
|
|
|
|
CONVEYOR COMPONENTS |
|
|
BEARING, DRIVE ROLLER |
560-70-21 |
|
FLANGE, DRIVE ROLLER BEARING |
560-70-10-02 |
|
DRIVE, ROLLER, |
10-52888 |
|
SPROCKET, DRIVE ROLLER |
562-22-24 |
|
BELT,TIMING MOTOR TO ROLLER |
562-32-02 |
|
SPEED CONTROL CONVEYOR MOTOR |
10-54342 |
|
BRUSHES, CONVEYOR MOTOR |
640-45-11 |
|
SPROCKET, CONVEYOR MOTOR |
562-22-06 |
|
BRACKET, CONVEYOR MOTOR MOUNT |
10-52966 |
|
NOTE: |
|
|
UNITS PRIOR TO '98 USE MOTOR KIT FOR 90 DEG. MOTOR |
10-52965 |
|
(KIT INCLUDES MOTOR, MOUNTS, & CONTROLLER) |
|
|
BRUSHES (PART# A3945-1) FOR GLEASON MOTOR CALL MFR. |
OBSOLETE |
|
(GLEASON AVERY MOTORS ALSO REPLACE LEG) |
10-52999-03 |
|
MOTOR, CONVEYOR |
615-40-11 |
|
MOUNTING BRACKET FOR LEG WITH LEG CONVERSION |
10-53004 |
|
|
|
|
BELT, CONVEYOR T-18-8M |
10-52905 |
|
BELT, CONVEYOR T-18-8BG (tunnel,bagger) 16.5x153" |
10-52907 |
|
IDLER, ROLLER |
10-52890 |
|
BOLT, TENSION ADJUSTER FOR CONVEYOR BELT |
527-68-40-01 |
|
SWITCH HEAVY DUTY 3 POLE ON/OFF |
|
|
TEMPERATURE COMPONENTS |
|
|
THERMOSTAT WITH PROBE |
610-22-11 |
|
THERMOSTAT SNAP DISC COOL DOWN |
660-20-09 |
|
THERMOSTAT DIGITAL |
610-22-28 |
|
TEMP PROBE (FOR ABOVE) |
610-22-29 |
|
KNOB, THERMOSTAT & BELT SPEED |
568-03-23 |
|
LIGHT, INDICATOR RED, HEAT ON |
625-60-29 |
|
RELAY SOLID STATE (DIGITAL CONTROLLER) |
610-50-47 |
|
RELAY SOLID STATE (A/C CONTROL FOR POWER 90AMP) |
610-50-48 |
|
|
|
|
NOTE: |
|
|
99 and up all 1700 watt pre '99 2 1500 watt & 2 1700 watt |
|
|
HEATER ELEMENT, 1500 WATTS 220 volts |
640-60-62 OBSOLETE |
|
HEATER ELEMENT, 1500 WATTS 240 volts |
640-60-71 |
|
HEATER ELEMENT, 1700 WATTS 220 volts |
640-60-50 |
|
HEATER ELEMENT, 1700 WATTS 240 volts |
640-60-70 |
|
HEATER ELEMENT, 2000 WATTS 240 volts |
640-60-69 |
|
BLOCK, HEATER MOUNTING |
10-52944 |
|
SEALANT, HIGH TEMP RTV |
573-10-02-01 |
|
INSULATION, PANELS MUST BE CUT TO FIT yellow |
502-70-03 |
|
HIGH
TEMP white |
502-70-05 |
|
|
|
|
AIR FLOW COMPONENTS |
|
|
AIR DAMPER RODS |
10-52934-02 |
|
AIR DAMPER KNOBS (BLACK PLASTIC) |
10-52992 |
|
BLOWER MOTOR, (FRONT) |
615-22-36 |
|
BLOWER MOTOR, (REAR) |
615-22-35 |
|
BLOWER FAN WHEEL (FRONT) (MUST ADD BUSHING) |
620-52-05 |
|
BLOWER FAN WHEEL (REAR) (MUST ADD BUSHING) |
620-52-10 |
|
BLOWER FLANGE (HOLDS SCREEN) |
10-19889 |
|
BUSHING FOR FAN WHEEL |
10-19891 |
|
COOLING FAN (plastic fan on top) (FRONT) (GRAY) |
620-42-05 |
|
COOLING FAN (plastic fan on top) (REAR) (WHITE) |
620-40-05 |
|
INLET SCREENS, INSIDE TOP OF TUNNEL |
620-64-12 |
|
NOTE: DO NOT REMOVE ALL THREE SCREEN MOUNTING SCREWS |
|
TOGETHER. THESE POSITION THE FAN TO HOUSING. CHANGE |
|
TWO THEN REPLACE THE THIRD AFTER HOUSING IS SECURED. |
|
CIRCUIT BREAKER ON/OFF SWITCH |
610-70-04 |
|
KNOB, AIR DAMPER ADJUSTMENT |
568-40-10 |
|
LIGHT, INDICATOR GREEN, POWER ON |
625-60-30 |
|
FUSE 1.5 AMP FAST ACTING |
600-62-27 |
|
FUSE 1 AMP/ 250V SLO-BLO |
600-62-12 |
|
FUSE HOLDER control panel mounted |
600-60-12-01 |
|
CAP FOR FUSE HOLDER |
600-60-12-02 |
|
FUSE FOR (conveyor) 1.5 FAST BLOW |
600-62-27 |
|
CURTAIN ASSEMBLY EXIT SIDE |
10-52978 |
|
CURTAIN ASSEMBLY ENTRANCE |
10-52979 |
|
SIDE PANEL FRONT |
10-52937-01 |
|
SIDE PANEL REAR |
10-52938-02 |
|
SWITCH HEAVY DUTY 3 POLE ON/OFF |
610-12-20 |
|
TOP PANEL |
10-52940 |
|
CASTERS, SET OF FOUR |
10-50910 |
|
TRANSFORMER (STEP DOWN) AUGUST 2000 AND LATER |
640-10-23 |
|
|
|
|
T-18-8R ROLLER BELT TUNNELS |
|
|
CHAIN,CONVEYOR ( 2 PER MACHINE) |
562-30-19-716 |
|
ROLLERS SILICON COVERED, CONVEYOR |
562-66-28 |
|
DRIVE ROLLER, CONVEYOR |
10-52893 |
|
SPROCKET, CONVEYOR DRIVE 5/8"BORE |
562-20-35 |
|
SPROCKET, ROLLER 1" BORE |
562-20-37 |
|
IDLER ROLLER, CONVEYOR |
10-52891 |
|
BEARING (SLEEVE) 1" ID 1.25" OD 1" LONG (OBSOLETE) |
560-40-40 |
|
USE MCMASTER # 6362K186 FOR ABOVE BEARING |
|
|
CHAIN, MASTER LINK FOR DRIVE |
562-30-20 |
Search
for an aftermarket product
To order products call
us toll free at