Search
for an aftermarket product
Or
Browse by product category
**NEW**Over
stock items-Make a Bid!
§ Shanklin®
after market parts
§ Orion®
after market parts
§ Hanagata®
after market parts
§ Teflon® Tape
§ Pad & Tubing
§ Nichrome® Wire
§ Belts
§ Weldotron® 1600
§ Used Equipment
§ Allied/Audion®
§ O/K® Durable Tapers
§ Heaters
§ Weldotron®
Tunnels
§ Beselerparts.net®
Official parts department for Charles Beseler Corporation.
§ Tape cutting knives
Signature Packaging
Xrite Shrink wrap
To order products call
us toll free at
1 800 690 5110
If you don't find
what you are looking for call us. We may have it!
Disclaimer: This
publication is not sanctioned or approved by any manufacturer or trade
name listed. Packaging Equipment and Parts, Inc. is not an authorized distributor or
representative for the following manufactures: Shanklin®,
Orion®, Hanagata®, Weldotron®. See our legal statement for more
information.
|
|
T-16-7 |
|
|
AIR INLET SCREEN |
10-54295 |
|
BEARINGS, DRIVE ROLLER |
560-70-10-01 |
|
BELT, CONVEYOR W/ LACING & CONNECTOR ROD |
10-19693 |
|
BOLTS, BELT TENSION ADJUSTMENT |
540-47-03 |
|
BRACKET, MAIN HEATER MOUNTING |
10-19671 |
|
BRACKET, THERMOSTAT PROBE MOUNT |
600-54-01 |
|
BRUSHES, GLEASON/AVERY INCLUDE SPRING/HOLDER (2 KIT) |
640-45-07-03-K |
|
BUSHING FOR ABOVE FAN WHEEL |
10-19891 |
|
CHAIN, CONVEYOR DRIVE |
10-19723 |
|
COOLING FAN FOR BLOWER (TOP OF MOTOR) WHITE |
620-40-05 |
|
CURTAIN BRACKET PLATES |
10-54283 |
|
CURTAINS 3 EACH SIDE |
10-19732-02 |
|
END COVER, OVER CURTAINS |
10-19700 |
|
FAN COOLING (BOX STYLE) |
620-20-18 |
|
FLANGE, BEARING HOLER 2 REQUIRED |
560-70-10-02 |
|
FUSE 30 AMP (FNQ-30) |
|
|
FUSE 1.5 AMP |
600-62-27 |
|
FUSE HOLDER (CAP AND WASHER) LARGE 30 AMP |
600-60-02 |
|
FUSE HOLDER CAP |
600-60-07-04 |
|
FUSE HOLDER WITH FUSE |
|
|
HEATER ELEMENT 1000 WATT 120 volts (1 per machine) |
640-60-72 |
|
HEATER ELEMENT 1500 WATT 120 volts (1 per machine) |
640-60-73 |
|
HEATER MOUNTING BLOCK |
10-19670 |
|
HEATER MOUNTING CLAMP |
600-92-03 |
|
INSULATION, PANELS (2 required must be cut to fit) |
500-81-58-01 |
|
LAG TAPE (3 required 2 on drive/ one on idler) |
573-63-01-260 |
|
LIGHT, HEAT ON INDICATOR |
625-60-25 |
|
MOTOR CONVEYOR SPEED CONTROL |
10-54341 |
|
MOTOR, BLOWER 120VOLT |
615-22-37 |
|
MOTOR, BLOWER (OBSOLETE) |
615-22-36 |
|
MOTOR, CONVEYOR (SPROCKET NOT INCLUDED) |
615-42-21 |
|
PANELS FRONT OUTER |
10-40573 |
|
PANELS REAR OUTER |
10-40570 |
|
PLATE, MOTOR MOUNTING |
10-19685 |
|
RELAY SOLID STATE (DIGITAL THERMOSTAT) (OPTIONAL) |
610-50-47 |
|
ROLLER, DRIVE |
10-19689-02 |
|
ROLLER, IDLER |
10-19690-02 |
|
SCREWS, CURTAIN BRACKET MOUNTING |
|
|
SCREWS, CURTAIN PANEL MOUNTING LOWER |
10-54284 |
|
SPRINGS, ON TENSIONER BOLTS |
562-72-52 |
|
SPROCKET, ON CONVEYOR MOTOR |
10-19687 |
|
SPROCKET, ON DRIVE ROLLER |
10-19963 |
|
SQUIRREL CAGE BLOWER WHEEL (REQUIRES BUSHING) |
620-52-05 |
|
SWITCH, ON/OFF |
610-10-31 |
|
TERMINAL ENDS FOR HIGH TEMP WIRE |
600-40-42 |
|
TERMINAL STRIP |
600-50-10 |
|
THERMOSTAT W/ PROBE KNOB AND PLATE (STANDARD) |
610-22-09 |
|
THERMOSTAT W/ PROBE ONLY (REPLACEMENT OF OLD UNIT) |
610-22-09-04 |
|
THERMOSTAT DIGITAL (OPTIONAL) |
610-22-28 |
|
THERMOSTAT PROBE FOR DIGITAL (OPTIONAL) |
610-22-29 |
|
TOP OUTER COVER |
10-54285 |
|
TRACKING FLANGE FOR CONVEYOR BELT |
10-54276 |
|
TRANSFORMER (STEP UP FOR BLOWER MOTOR) |
640-10-48-01 |
|
WIRE, HIGH TEMP TO HEATERS AND MOTOR (PER FT) |
605-12-02 |
|
