PEP - Packaging Equipment & Parts
Home Products About Us Contact Us Search
Clearance Meet Keith   Meet Matt Meet Marty
  Home > Products > Beseler® T14

Search for an aftermarket product

Or

Browse by product category

 **NEW**Over stock items-Make a Bid!
  § Shanklin® after market parts
  § Orion® after market parts
  § Hanagata® after market parts
  § Teflon® Tape
  § Pad & Tubing
  § Nichrome® Wire
  § Belts
  § Weldotron® 1600
  § Used Equipment
  § Allied/Audion®
  § O/K® Durable Tapers
  § Heaters
   § Weldotron® Tunnels
   § Beselerparts.net® Official parts department for Charles Beseler Corporation.
   § Tape cutting knives

Signature Packaging

Xrite Shrink wrap

To order products call us toll free at
1 800 690 5110

If you don't find what you are looking for call us. We may have it!

Disclaimer: This publication is not sanctioned or approved by any manufacturer or trade name listed. Packaging Equipment and Parts, Inc. is not an authorized distributor or representative for the following manufactures: Shanklin®, Orion®, Hanagata®, Weldotron®.  See our legal statement for more information.

 
T-14-8 TUNNELS  
BEARING, DRIVE ROLLER 560-70-10-01
BEARING, FLANGE HOLDER 2 REQUIRED 560-70-10-02
BELT TRACKING GUIDE RAIL (FLANGE) CONVEYOR  10-40542
BELT, CONVEYOR W/ LACING AND CONNECTOR ROD 10-19692
BLOWER FAN WHEEL (BUSHING MUST BE ADDED) 620-52-05
BUSHING FOR BLOWER WHEEL 10-19891
BOLTS, BELT TENSION ADJUSTMENT 540-47-03
BRACKET, HOT PLATE HEATER MOUNTING 600-92-02
BRACKET, MAIN HEATER MOUNTING 10-19734
BRACKET, THERMOSTAT PROBE MOUNT 600-54-01
BRUSHES GLEASON/AVERY INCLUDE SPRING/HOLDER (2) 640-45-07-03-K
BRUSHES VON WEISS/FASCO  DO NOT INCLUDE SPRINGS 640-45-07-01
CHAIN, CONVEYOR DRIVE 10-19723
CURTAINS  BRACKET PLATES 10-19714
CURTAINS,ORDER 6 PER MACHINE 10-19732
CURTAINS, END COVER, OVER CURTAINS  10-19700
DRIVE ROLLER 10-19689-01
FUSE 1.5 AMP 600-62-27
FUSE HOLDER CAP 600-60-07-04
FUSE HOLDER WITH FUSE 10-21634
HEATER ELEMENT, HOT PLATE 500 WATTS 640-60-60
HEATER ELEMENT, 1000 WATTS  MAIN/TOP (2 REQ.) 15 ohms 640-60-48
HOLDER FOR VON WEISS/FASCO BRUSH SPRING 615-42-21-01
HOT PLATE (U SHAPED HEATER MOUNTED TO BOTTOM) 10-19686
IDLER ROLLER 10-19690-01
INSULATION, PANELS (2 REQUIRED MUST BE CUT TO FIT) 500-81-58-01
INSULATOR BLOCK, MAIN HEATER MOUNTING 10-19691
INSULATOR BOX, ALUMINMUM PANEL W/ INSULATION 10-19748
LIGHT, HEAT ON INDICATOR 625-60-25
LIGHT, HOT PLATE INDICATOR 625-60-25
MOTOR, BLOWER   615-20-51
MOTOR, CONVEYOR GLEASON (SPROCKET NOT INCLUDED) 615-42-24
NOTE:  
sprocket is needed when replacing an old von weiss motor  
to a gleason motor  
MOTOR, COOLING FAN  ASSEMBLY  (NOT AVAILABLE) 10-40576
MOTOR ONLY COOLING 615-20-52
FAN ONLY COOLING 620-40-17
OUTER COVER TOP 10-40557
PANELS, FRONT OUTER  10-40573
PANELS, REAR OUTER  10-40570
PLATE, BLOWER MOTOR MOUNTING     10-19698
PLATE, COVEYOR MOTOR MOUNTING 10-19685
POWER CORD W/ PLUG 125 VOLTS 30 AMPS 605-72-86
RECEPTICLE FOR MAIN POWER CORD 10-40511
RUBBER FEET (4) 570-40-13
SCREWS, CURTAIN BRACKET MOUNTING  
SCREWS, CURTIAN PANEL MOUNTING LOWER  
SCREWS, HEATER MOUNTING BLOCK ATTACHMENT  
SPEED CONTROL CONVERSION KIT FOR CONVEYOR BELT 10-54341
SPRINGS FOR VON WEISS/FASCO MOTOR 640-45-07-02
SPRINGS, ON TENSIONER BOLTS 562-72-52
SPROCKET, ON CONVEYOR MOTOR 10-19687
SPROCKET, ON DRIVE ROLLER 10-19963
SWITCH, ON/OFF  610-10-31
TERMINAL ENDS FOR HIGH TEMP WIRE 600-40-42
TERMINAL STRIP 600-50-10
THERMOSTAT W/ PROBE (INCLUDING PLATE AND KNOB) 610-22-09
THERMOSTAT W/ PROBE (ONLY) 610-22-09-04
THERMOSTAT, HOT PLATE  (BI-METAL SWITCH) 660-20-11
WIRE,HIGH TEMP TO HEATERS & MOTOR (PER FOOT) 605-12-02
            NOTES:   
FIXED SPEED CONVEYOR TUNNELS & VARIABLE   
SPEED UNITS MUST BE UPGRADED TO   
SPEED CONTROL   10-54341.
FIXED SPEED UNITS ALSO REQUIRE:  
MOTOR  615-42-21.
TRACKING FLANGE ELIMINATES CONVEYOR BELT  10-40542
TRACKING PROBLEMS ON OLDER UNITS AND MOUNTS     
DIRECTLY ON TOP OF THE INSULATION PAN UNDER THE    
BELT.  

 
   

Last updated: 06/05/2008 2002 PEP, Inc. All rights reserved
Legal > Privacy notice