PEP - Packaging Equipment & Parts
Home Products About Us Contact Us Search
Clearance Meet Keith   Meet Matt Meet Marty
  Home > Products > Beseler® 4530 & 4030

Search for an aftermarket product

Or

Browse by product category

 **NEW**Over stock items-Make a Bid!
  § Shanklin® after market parts
  § Orion® after market parts
  § Hanagata® after market parts
  § Teflon® Tape
  § Pad & Tubing
  § Nichrome® Wire
  § Belts
  § Weldotron® 1600
  § Used Equipment
  § Allied/Audion®
  § O/K® Durable Tapers
  § Heaters
   § Weldotron® Tunnels
   § Beselerparts.net® Official parts department for Charles Beseler Corporation.
   § Tape cutting knives

Signature Packaging

Xrite Shrink wrap

To order products call us toll free at
1 800 690 5110

If you don't find what you are looking for call us. We may have it!

Disclaimer: This publication is not sanctioned or approved by any manufacturer or trade name listed. Packaging Equipment and Parts, Inc. is not an authorized distributor or representative for the following manufactures: Shanklin®, Orion®, Hanagata®, Weldotron®.  See our legal statement for more information.

 
4530  &  4030 L- SEALERS  
 
COMPONENTS ON SEAL ARM ASSEMBLY  
SEAL ARM (HEAD) ASSEMBLY COMPLETE        MTB 10-36235-19
4030 SEAL ARM (HEAD) ASSY REPLACE W/ 4530 head above  
4530 SEAL WIRE (six pack of wires)           SIDE 10-41690-04
4530 SEAL WIRE (six pack of wires)           FRONT 10-41690-17
4030 SEAL WIRE (six pack of wires)          SIDE 10-41690-04
4030 SEAL WIRE (six pack of wires)          FRONT 10-41690-05
NUT, BRASS  FOR ANCHOR SCREW 545-24-20-30
SCREW, BRASS  (seal wire achor bolt mounted in tensioner) 524-24-71-30
GROUND STRAP (copper "C" plate at corner) 10-41686
BLOCK, GROUNDING (right side of anchor point of front seal wire) 10-36224
BLOCK, INSULATOR   (front of side wire) 10-16047
BLOCK, INSULATOR   (in wire tensioner) 10-41327
BLOCK,LIFTER FOR SEAL WIRE 10-36210
RTV CEMENT (attaches transite strip) 573-10-02-01
SCREW, ATTACHES FRONT SEAL WIRE AT CORNER 521-12-02-01
SEAL WIRE CONNECTOR KIT 10-16201
SHAFT FOR CAM  AND MOUNTING SPRING 10-16051
TENSIONER ASSY W/CAM, STUDS,SPRINGS, MOUNT (side) 10-41212
TENSIONER ASSY W/CAM, STUDS,SPRINGS,MOUNT (front) 10-41211
THUMB NUT, BLACK PLASTIC (attaches seal wire) 568-03-03
TRANSITE INSULATOR 40" LENGTHS (under seal wires) 10-16041-18
WASHER, BRASS (under thumb nut & screw above) 548-24-19
CAM FOR TENSIONER     FRONT 10-16264
CAM FOR TENSIONER     SIDE 10-16048
BEARINGS, seal head pivot bearings 560-70-06
BOLTS, adjusters for mag/seal wire microswitches 527-65-40-01
HANDLE FOR CAM 10-16049
SPRIND FOR TENSIONERS 562-70-17
THREADED ROD-holds microswitch adjusts bolts       MTB 10-36227-02
 
FILM HOLDDOWNS  
FILM HOLDDOWN,  COMPLETE    FRONT 4530 10-41104-14
FILM HOLDDOWN,  COMPLETE    FRONT 4030 10-41104-07
FILM HOLDDOWN, COMPLETE     SIDE     ALL 10-41104-06
SHOULDER BOLTS FOR HOLDDOWNS 10-16449
SPRING FOR HOLDDOWNS 562-72-47
 
 
HB-3  
COVER, BOTTOM METAL SHEILD FOR RECEPTICLE 10-41326
COVER, TOP METAL BRACKET SUPPOSRTS RECEPTICLE 10-16148
EXTENSION ARM, BURNER SLIDES IN THIS RACK 10-41258
GLOW TIP FOR HB-3            STANDARD TIP 10-41265-20
GLOW TIP                              LARGER "S" TIP 10-41265-25
HOLEBURNER COMPLETE HB-3
HOLEBURNER RECEPTICLE  (on seal arm) 600-11-02
O-RING, HEIGHT ADJUSTER 573-40-13
POST, HEXAGON MOUNTING POST 10-41252
THUMBWHEEL, BLACK PLASTIC KNOB ON HB-3 568-20-19
 
CLOSER (DOOR) ASSSEMBLY COUNTER WEIGHT  
CLOSER ASSEMBLY        MTB 10-40168
COUNTER WEIGHT SUPPORT ROD, (HOOKS) 10-40094
COUNTER WEIGHT          MTB 10-36419-04
 
SEAL PAD ASSEMBLY COMPONENTS  
4030 SEAL PAD COMPLETE W/ HOLDER, PAD, TAPE  front 10-41410-02
4030 SEAL PAD COMPLETE W/ HOLDER, PAD, TAPE  side 10-41410-01
4530 SEAL PAD COMPLETE W/ HOLDER,PAD,  TAPE  front 10-50575-07
4530 SEAL PAD COMPLETE W/ HOLDER,PAD,  TAPE  side 10-50575-08
SEAL PAD           1"  FOAM  36" LENGTH 10-50588-05
SEAL PAD          3/4" FOAM 36" LENGTH 10-16058-16
TEFLON SLEEVE MATERIAL 12" X 9 YARDS 573-56-64
TEFLON TAPE    2 1/2"  9 YARD ROLL 573-56-68
TEFLON TAPE      3/4" 10 YARD ROLL 573-56-69
TEFLON TAPE     3/4"  36 YARD ROLL 573-56-17-01
 
MAGNET ASSEMBLY COMPONENTS  
BOLT, MOUNTS SPRING AND PLATE TO BRACKET 531-66-73-01
BRACKET, CONTACT PLATE MOUNTING 10-50835
CONTACT PLATE (MOUNTED TO SEAL HEAD) 10-50834
MAGNET 640-40-06
MTG BLOCK, MAGNET HOLDER BACKUP PLATE 10-36418
MTG PLATE, MAGNET HOLDER 10-41340
NUY, NYLOCK 546-57-34
SPRING, ON CONTACT PLATE 562-72-66
WASHER 548-50-05
 
CONVEYOR ASS'BLY COMPONENTS MB MODELS  
ADJUSTER BOLT FOR TENSIONER ASSEMBLY 527-65-40-01
ANCHOR NUT FOR ADJUSTER 10-36181
BRUSHES- FOR CONVEYOR MOTOR 640-45-11
BELT,CONVEYOR W/ LACING & CONNECTOR ROD 10-36231-06
CRANK HANDLE 10-16591-02
DRIVE ROLLER 10-36460-02
DRIVE ROLLER BEARING 560-15-09
DRIVE ROLLER SPROCKET 562-22-07
IDLER ROLLER 10-36459-02
LAG TAPE FOR DRIVE ROLLER 10-16788
LIFT ROD,      (on scissor jack replace with lift screw) 10-41175
LIFT SCREW (threaded rod for crank handle)  10-36203-05
LIFT SCREW BUSHING, BRASS 10-36229
LIFT SCREW COLLAR 557-07-09
LIFT SCREW THRUST BEARING 560-30-52
NOTE: SHADED POLE MOTOR NEEDS MOTOR,BRACKET AND PLATE
MOTOR  615-40-11
MOTOR BRACKET 10-41310
MOTOR PLATE      10-41309
MOTOR SPROCKET 562-22-06
TIMING BELT 562-32-01
 
ELECTRICAL COMPONENTS  
SWITCH, SEAL, MAGNET,CONVEYOR MICROSWITCH 610-18-22
BRUSHES, MOTOR 640-45-11
CAPACITOR, MAGNETS   2.2 micro  16volts 632-21-22-52-06
CAPACITOR, MAGNETS   20  micro 250wvolts 632-24-20-63-25
CIRCUIT BREAKER, CONVEYOR 610-70-33
CIRCUIT BREAKER, MAIN POWER 610-70-10
CONTROLLER, BELT SPEED 10-54342
LIGHTS, INDICATOR        120 VOLT 625-60-31
LIGHTS, INDICATOR        220 VOLT 625-60-30
MAGNET 640-40-06
MAIN POWER CORD 10-40172-30
MOTOR, CONVEYOR 615-40-11
SWITCH, ON/OFF  610-14-09
RECTIFIER, MAGNETS 635-70-29
RELAY CONTACTOR 610-50-04
TERMINAL JUMPER 600-54-01
TERMINAL STRIP 16 PIN DRAWER 600-50-44
TERMINAL STRIP   4 PIN RECTIFIER 600-50-06
TERMINAL STRIP   9 PIN UPPER DECK 600-50-10
TIMER KNOB (ROUND) 568-03-23
TIMER, CONVEYOR AND MAGNETS (EM UP DWELL) 10-54180-91
TRANSFORMER, (seal wire) 640-10-48-01
TRANSFORMER, HOLEBURNER 640-10-35
TRANSFORMER, SEAL WIRES 640-10-37
 
SEAL WIRE TEMP &  BALANCE COMPONENTS  
BALAST WIRE             TEMP EQUALIZER JUMPER     4030 10" 10-40198-05
BALAST WIRE             TEMP EQUALIZER JUMPER     4530 15" 10-40198-06
CONTACT SWITCH, ADJUSTING DIAL ON FRONT PANEL 610-18-23
KNOB FOR CONTACT SWITCH 568-30-02
MONITOR WIRE 10-16457
TEMP CONTROL ASSEMBLY, " K TIMER"  " MONITOR" 10-16450
 
FILM CRADLE/SEPERATOR TRAY COMPONENTS  
BRACKET, OPENING ROD MOUNT 10-50551
BRAKE THUMBSCREW 540-43-32
COLLAR, FILM POSITIONING 10-36466
COLLAR, ROLLER MOUNTING RETAINER 557-07-09
FILM BRAKE 10-50554
FILM OPENING ROD 10-41386
FRONT PLATE 10-36389
MOUNTING BRACKET 10-16441
REAR PLATE 10-36390-01
ROLLER, FILM CRADLE 10-36458-02
SEPERATOR TRAY STAINLESS STEEL 10-40180
THUMBSCREW FOR OPENING ROD POSITION 568-20-05

 
   

Last updated: 06/05/2008 2002 PEP, Inc. All rights reserved
Legal > Privacy notice