PEP - Packaging Equipment & Parts
Home Products About Us Contact Us Search
PEP Photos Meet Keith Meet Ryan Meet Sarah Meet Marty
  Home > Products > Beseler® 2420 SL

Search for an aftermarket product

Or

Browse by product category

 **NEW**Over stock items-Make a Bid!
  Shanklin® after market parts
 Orion® after market parts
 Hanagata® after market parts
 Teflon® Tape
 Pad & Tubing
 Nichrome® Wire
 Belts
 Weldotron® 1600
 Used Equipment
 Allied/Audion®
 O/K® Durable Tapers
 Heaters
  Weldotron® Tunnels
  Beselerparts.net® Official parts department for Charles Beseler Corporation.
   Tape cutting knives   and other Taper Parts

  IPM Stretch wrapper parts

  Xrite® Shrink wrap

   Lantech®

To order products call us toll free at
1 800 690 5110

If you don't find what you are looking for call us. We may have it!

Disclaimer: This publication is not sanctioned or approved by any manufacturer or trade name listed. Packaging Equipment and Parts, Inc. is not an authorized distributor or representative for the following manufactures: Shanklin®, Orion®, Hanagata®, Weldotron®.  See our legal statement for more information.

 
2420SL L-SEALERS  
   
COMPONENTS ON SEAL ARM ASSEMBLY  
2420 SEAL ARM     (HEAD) ASSEMBLY COMPLETE 10-36235-23
2420 SEAL WIRE (six packs of wires)       FRONT 10-41690-20
2420 SEAL WIRE (six packs of wires)       SIDE 10-41690-01
BEARINGS, SEAL HEAD PIVOT BEARINGS 560-70-06
BOLTS, ADJUSTERS FOR MAG/SEAL WIRE MICRO SWITCHES 527-65-40-01
CAM 10-16048
CAM HANDLE 10-16049
GROUND STRAP (copper "C"  plate at corner) 10-41686
GROUNDING BLOCK (right side anchor point of front seal wire) 10-36224
INSULATOR,PLASTIC FOR BRASS POST 557-20-64
MOUNTING SHAFT FOR TENSIONER CAM & SPRING 10-16129
NUT,    BRASS    (for anchor screw and post) 545-24-20-30
POST,   BRASS   (front anchor point on side seal wire) 553-44-02
RTV CEMENT     (attaches transite strip) 573-10-02-01
SCREW,              (attaches front seal wire at corner) 521-12-02-01
SCREW, BRASS (seal wire anchor bolt mounted in tensoner) 524-24-71-30
SEAL WIRE CONNECTOR KIT 10-16201
SPRING, (for tensioner assembly) 562-70-17
STUD FOR SPRING MOUNTING 10-16145
TENSIONER ASSY, W/CAM, STUDS, SPRINGS MOUNT-SIDE 10-41212
TENSIONER ASSY, W/CAM, STUDS, SPRINGS, MOUNT -FRONT 10-41211
THREADED ROD, HOLDS MICROSWITCH ADJUST BOLTS    EM 10-40130
THREADED ROD, HOLDS MICROSWITCH ADJUST BOLTS GSM/MTB 10-36227-02
THUMB NUT ( black plastic attaches seal wires ) 568-03-03
TRANSITE INSULATOR 40" LENGHTS (under seal wires) 10-16041-18
WASHER, BRASS       (under thumb nut & screw above) 548-24-19
WASHERS, PLASTIC  (brass post mounting isulators)  548-24-13
   
FILM HOLDDOWNS  
FILM HOLDDOWN, COMPLETE      FRONT 10-41104-17
FILM HOLDDOWN, COMPLETE      SIDE 10-41104-03
SHOULDER BOLTS FOR HOLDDOWNS 10-16449
SPRING FOR HOLDDOWNS 562-72-47
   
CLOSER (DOOR) ASSEMBLY/ COUNTER WEIGHT  
CLOSER ASSEMBLY          GSMSL 10-40168
CLOSER ASSEMBLY          MTB 10-40168
CLOSER ASSEMBLY          EM 10-40163
COUNTER WEIGHT             MTB 10-40126-01
COUNTER WEIGHT             EM 10-40126-02
COUNTER WEIGHT SUPPORT ROD, (HOOKS) 10-40094
   
HB-3  
COVER, BOTTOM (metal shield for recepticle) 10-41326
COVER,TOP          (metal bracket supports recepticle) 10-16148
EXTENSION ARM, BURNER SLIDES IN THIS RACK 10-41258
GLOW TIP FOR HB-3        STANDARD TIP 10-41265-20
GLOW TIP                          LARGER "S" TIP 10-41265-25
HOLEBURNER COMPLETE HB-3
HOLEBURNER RECEPTICLE (ON SEAL ARM) 600-11-02
O-RING, HEIGHT ADJUSTER 573-40-13
POST, HEXAGON MOUNTING POST 10-41252
THUMBWHEEL, (black plastic knob on HB-3) 568-20-19
   
SEAL PAD ASSEMBLY COMPONENTS  
SEAL BED ASSEMBLY 10-54188
SEAL BED RETAINING COMPONENTS    MACHINE SCREW 521-64-71-02
                                                                     NYLOCK NUT 546-57-08
                                                                     WASHER 548-24-25
SEAL BED SPRING   L/F & R/R                  (lighter gauge) 562-72-64
SEAL BED SPRING   both in corner            (heavy gauge) 562-72-15
SEAL PAD            1" FOAM 45" LENGTH 10-50588-06
TEFLON SLEEVE MATERIAL 12" X 9 YARDS 573-56-64
TEFLON TAPE    2 1/2"        9 YARD ROLL 573-56-68
TEFLON TAPE       3/4"      10 YARD ROLL 573-56-69
TEFLON TAPE       3/4"      36 YARD ROLL 573-56-17-01
   
MAGNET ASSEMBLY COMPONENTS  
BOLT, (mounts spring and plate to bracket) 531-66-73-01
TREMINAL STRIP- 4 PIN FOR RECTIFIER 600-50-06
BRACKET, CONTACT PLATE MOUNTING 10-50835
BRACKET, MAGNET HOLDER 10-50833
CONTACT PLATE (mounted to seal head) 10-50834
MAGNET 640-40-06
NUT, NYLOCK 546-57-34
RECTIFIER ASSEMBLY 10-40082
SPRING, (on contact plate) 562-77-66
WASHER 548-50-05
   
GSMSL  MODEL PRODUCT TRAY COMPONENTS  
        FOR MODELS WITHOUT CONVEYOR  
BASE, CHANNEL ASSMY 10-54210
LOADING TABLE 10-54213
LOADING TRAY HEIGHT ADJUSTER 10-54216
SPRING, TABLE HEIGHT ASSIST 10-54211
   
CONVEYOR ASSEMBLY COMPONENTS MB MODELS  
ADJUSTER BOLT FOR TENSIONER ASSY 527-65-40-01
ANCHOR NUT FOR ADJUSTER 10-36181
BELT, CONVEYOR W/LACING & CONNECTOR ROD 10-36230
BELT, TIMING 562-32-01
BRUSHES- FOR CONVEYOR MOTOR 640-45-11
CRANK HANDLE 10-16591-02
DRIVE ROLLER 10-36460-01
DRIVE ROLLER BEARING 560-15-09
DRIVE ROLLER SPROCKET 562-22-07
IDLER ROLLER 10-36459-01
LAG TAPE FOR ROLLER 10-16788
LIFT ROD,      (on scissor jack replace w/lift screw) 10-36290-02
LIFT SCREW  (threaded rod for cank handle) 10-41263
LIFT SCREW BUSHING, BRASS 10-36229
LIFT SCREW, COLLAR 557-07-09
MOTOR 615-40-11
MOTOR MOUNTING BRACKET 10-54176
MOTOR SPROCKET 562-22-06
   
ELECTRICAL COMPONENTS  
BRUSHES, MOTOR 640-45-11
CAPACITOR,   MAGNET 632-21-52-06
CIRCUIT BREAKER, CONVEYOR 610-70-03
CIRCUIT BREAKER, MAIN POWER 610-70-10
CONTROLLER, BELT SPEED 10-54342
CORD, MAIN POWER  10-40172-20
LIGHT,  INDICATOR            120 VOLT 625-60-31
LIGHT,  INDICATOR            220 VOLT 625-60-30
MAGNET 640-40-06
MOTOR, CONVEYOR 640-40-11
ON/ OFF SWITCH 610-14-09
RECTIFIER, MAGNETS 635-70-29
RELAY CONTACTOR 610-50-04
SWITCH, SEAL,MAGNET,CONVEYOR MICROSWITCH 610-18-22
TERMINAL JUMPER 600-54-01
TERMINAL STRIP      9 PIN 600-50-10
TERMINAL STRIP    16 PIN 600-54-01
TERMINAL STRIP- 4 PIN FOR RECTIFIER 600-50-06
TIMER KNOB (round) 568-03-23
TIMER, CONVEYOR AND MAGNETS (EM UP DWELL) 10-54180-91
TRANSFORMER, HOLEBURNER 640-10-35
TRANSFORMER, SEAL WIRES 640-10-29
   
SEAL WIRE TEMP & BALANCE COMPONENTS  
BALAST WIRE           TEMP EQUALIZER JUMPER NOT REQUIRED
CONTACT SWITCH, ADJUSTING DIAL ON FRONT PANEL 610-18-23
KNOB,    (for contact switch) 568-30-02
MONITOR WIRE 10-16457
TEMP CONTROL ASSEMBLY " K TIMER" " MONITOR) 10-40014
   
FILM CRADLE/ SEPERATOR TRAY ASSEMBLY  
FILM CRADLE ASSEMBLY 10-41407
BRACKET, (for film opening rod) 10-50552
BRAKE 10-50554
COLLAR ,   (for roller installation) 557-07-09
COLLAR FILM POSITIONING 10-36466
CRADLE TIE SUPPORT 10-16615-03
FILM OPENING ROD 10-50553-02
FRONT PLATE, ROLLER MOUNT  10-54586
REAR PLATE 10-54191
ROLLER 10-36458-01
ROLLER MOUNTING BRACKET 10-16441
SEPERATOR TRAY STAINLESS STEEL 10-54231-21
THUMBKNOB,  (black plastic for opening rod position) 568-20-05
   
EM MODEL ADDITIONAL COMPONENTS  
BOLT CRANK ARM TO MOTOR 527-32-73-01
BRACKET, MOUNT FOR TDC DETECT SWITCH 10-41434
BRAKE ASSEMBLY 562-44-01
CLOSER ASSEMBLY 10-40163
COVER, SAFTEY COVER OVER MOTOR & CRANL ASSEMBLY 10-50842
CRANK ARM ASSEMBLY, ON DRIVER MOTOR 10-50840
CRANK ARM HUB 10-41632
HEIGHT ADJUSTER CLAMP part of closer assy
INTERLOCK SWITCH, ON SAFTEY COVER 610-10-19
MOTOR, HEAD DRIVING 615-42-20
BUTTON, MUSHROOM HEAD AND SWITCH 610-30-02
SWITCH, PALM  610-18-05
SWITCH, TDC DETECTOR SWITCH 610-18-38
SWITCH, UP DWELL START UP, ON SEALER TOP DECK 610-18-22
SWITCH,TOGGLE AUTO/SEMI ON CONTROL PANEL 610-10-15
THUMB SCREW part of closer assy
TIMER, UP DWELL 10-54180-91
TRANSFORMER, STEPDOWN 640-10-48-01

 
   

Last updated: 10/07/2010 2002 PEP, Inc. All rights reserved
Legal > Privacy notice