PEP - Packaging Equipment & Parts
Home Products About Us Contact Us Search
Clearance Meet Keith   Meet Matt Meet Marty
  Home > Products > Beseler® 2420 MTB-II-EM

Search for an aftermarket product

Or

Browse by product category

 **NEW**Over stock items-Make a Bid!
  § Shanklin® after market parts
  § Orion® after market parts
  § Hanagata® after market parts
  § Teflon® Tape
  § Pad & Tubing
  § Nichrome® Wire
  § Belts
  § Weldotron® 1600
  § Used Equipment
  § Allied/Audion®
  § O/K® Durable Tapers
  § Heaters
   § Weldotron® Tunnels
   § Beselerparts.net® Official parts department for Charles Beseler Corporation.
   § Tape cutting knives

Signature Packaging

Xrite Shrink wrap

To order products call us toll free at
1 800 690 5110

If you don't find what you are looking for call us. We may have it!

Disclaimer: This publication is not sanctioned or approved by any manufacturer or trade name listed. Packaging Equipment and Parts, Inc. is not an authorized distributor or representative for the following manufactures: Shanklin®, Orion®, Hanagata®, Weldotron®.  See our legal statement for more information.

 
2420 MTB-II-EM L-SEALER  
   
COMPONENTS ON SEAL ARM ASSEMBLY  
SEAL WIRE SINGLE 10-41690-23
BEARINGS, SEAL HEAD PIVOT BEARINGS 560-70-06
BOLTS, ADJUSTERS FOR MAG/SEAL WIRE MICRO SWITCHES 527-65-40-01
CAM 10-16048
CAM HANDLE 10-16049
GROUND STRAP (copper " C"  plate at corner) 10-41686
GROUNDING BLOCK (right side anchor point of front seal wire) 10-36224
INSULATOR,PLASTIC FOR BRASS POST 557-20-64
MOUNTING SHAFT FOT TENSIONER CAM & SPRING 10-16129
NUT,    BRASS   (for anchor screw and post) 545-24-20-30
POST,   BRASS  (front ancjor point on side seal wire) 553-44-02
RTV CEMENT    (attaches transite strip) 573-10-02-01
SCREW,             (attaches front seal wire at corner) 521-12-02-01
SCREW,BRASS (seal wire anchor bolt mounted in tensoner) 524-24-71-30
SEAL WIRE CONNECTOR KIT 10-16201
SPRING, (for tensioner assembly) 562-70-17
STUD FOR SPRING MOUNTING 10-16145
TENSIONER ASSY, W/CAM, STUDS, SPRINGS MOUNT-SIDE 10-41212
TENSIONER ASSY, W/CAM, STUDS, SPRINGS, MOUNT -FRONT 10-41211
THREADED ROD, HOLDS MICROSWITCH ADJUST BOLTS    EM 10-40130
THREADED ROD, HOLDS MICROSWITCH ADJUST BOLTS GSM/MTB 10-36227-02
THUMB NUT (black plastic attaches seal wires) 568-03-03
TRANSITE INSULATOR 40" LENGHTS (under seal wires) 10-16041-18
WASHER, BRASS (under thumb nut & screw above) 548-24-19
WASHERS, PLASTIC  (brass post mounting isulators)  548-24-13
   
FILM HOLDDOWNS  
FILM HOLDDOWN, COMPLETE     FRONT 10-41104-17
FILM HOLDDOWN, COMPLETE     SIDE 10-41104-03
SHOULDER BOLTS FOR HOLDDOWNS 10-16449
SPRING FOR HOLDDOWNS 562-72-47
   
SEAL PAD ASSEMBLY COMPONENTS  
SEAL BED SPRING         L/F & R/R     (lighter gauge) 562-72-64
SEAL BED SPRING     both in corner   (heavy gauge) 562-72-15
SEAL PAD              1" FOAM 45 " LENGTH 10-50588-06
TEFLON SLEEVE MATERIAL 12" X 9 YARDS 573-56-64
TEFLON TAPE      2 1/2"         9 YARD ROLL 573-56-68
TEFLON TAPE        3/4"        10 YARD ROLL 573-56-69
TEFLON TAPE        3/4"        36 YARD ROLL 573-56-17-01
   
MAGNET ASSEMBLY COMPONENTS  
BOLT, (mounts spring and plate to bracket) 531-66-73-01
BRACKET, MAGNET HOLDER 10-50833
MAGNET 640-40-09
NUT, NYLOCK 546-57-34
SPRING, (on contact plate) 562-77-66
WASHER 548-50-05
   
CONVEYOR ASSEMBLY COMPONENTS   
ADJUSTER BOLT FOR TENSIONER ASSY 527-65-40-01
ANCHOR NUT FOR ADJUSTER 10-36181
BELT, CONVEYOR  W/LACING & CONNECTOR ROD 10-36230
BELT, TIMING  562-32-01
BRUSHES- FOR CONVEYOR MOTOR 640-45-11
CRANK HANDLE 10-16591-02
DRIVE ROLLER 10-36460-01
DRIVE ROLLER BEARING 560-15-09
DRIVE ROLLER SPROCKET 562-22-07
IDLER ROLLER 10-36459-01
LAG TAPE FOR ROLLER 573-56-36
LIFT ROD,      (on scissor jack replace w/lift screw) 10-36290-02
LIFT SCREW  (threaded rod for cank handle) 10-41263
LIFT SCREW BUSHING, BRASS 10-36229
LIFT SCREW, COLLAR 557-07-09
MOTOR 615-40-11
MOTOR MOUNTING BRACKET 10-54176
MOTOR SPROCKET 562-22-06
   
ELECTRICAL COMPONENTS  
CARTRIDGE HEATER    FRONT 641-01-24
CARTRIDGE HEATER    SIDE 641-01-20
CIRCUIT BREAKER  20AMP DOUBLE POLE 610-70-36
BRUSHES, MOTOR 640-45-11
CAPACITOR,   MAGNET 632-21-52-06
CONTROLLER, BELT SPEED 660-40-25
CORD, MAIN POWER  10-40172-10
LIGHT, INDICATOR           120 VOLT 625-60-31
MAGNET 640-40-09
MOTOR, CONVEYOR 640-40-11
ON/ OFF SWITCH 610-14-09
RELAY SOLID STATE 610-50-44
SWITCH, SEAL,MAGNET,CONVEYOR MICROSWITCH 610-18-22
TEMPERATURE CONTROLLER DIGITAL 610-22-28
TEMPERATURE PROBE 660-20-23
TERMINAL JUMPER 600-54-01
TERMINAL STRIP    16 PIN 600-54-01
TERMINAL STRIP      9 PIN 600-50-10
TIMER KNOB (round) 568-03-23
TIMER, CONVEYOR AND MAGNETS  10-54180-90
TRANSFORMER, SEAL WIRE 640-10-29
TRANSFORMER, STEP DOWN 640-10-48-01
TRANSFORMER, HOLEBURNER 640-10-35
TREMINAL STRIP      4 PIN FOR RECTIFIER 600-50-06
   
FILM CRADLE/ SEPERATOR TRAY ASSEMBLY  
FILM CRADLE ASSEMBLY 10-41407
BRACKET, (for film opening rod) 10-50552
BRAKE 10-50554
COLLAR , (for roller installation) 557-07-09
COLLAR FILM POSITIONING 10-36466
CRADLE TIE SUPPORT 10-16615-03
FILM OPENING ROD 10-50553-02
FRONT PLATE, ROLLER MOUNT  10-54193
REAR PLATE 10-36390-01
ROLLER 10-36458-01
ROLLER MOUNTING BRACKET 10-16441
SEPERATOR TRAY STAINLESS STEEL 10-54231-21
THUMBKNOB,  (black plastic for opening rod position) 568-20-05
   
EM MODELS  
BRACKET, FOR TDC SWITCH 10-41434
BRAKE ASSEMBLY  562-44-01
SWITCH  SAFETY INTERLOCK 610-18-22
SWITCH  TDC DETECTOR 610-18-38
SWITCH  PUSHBUTTON 610-18-76
MOTOR   SEAL HEAD 615-42-20
TIMER     (ANTI TIE DOWN) 10-54180-90

 
   

Last updated: 06/05/2008 2002 PEP, Inc. All rights reserved
Legal > Privacy notice