PEP, Inc - Products -Beseler

Search for an aftermarket product

Or

Browse by product category

**NEW**Over stock items-Make a Bid!
§ Shanklin^{®
after market parts}
§ Orion^{®
after market parts}
§ Hanagata^{®
after market parts}
§ Teflon^® Tape
§ Pad & Tubing
§ Nichrome^® Wire
§ Belts
§ Weldotron® 1600
§ Used Equipment
§ Allied/Audion^®
§ O/K® Durable Tapers
§ Heaters
§ Weldotron® Tunnels
§ Beselerparts.net^® Official parts department for Charles Beseler Corporation.
§ Tape cutting knives

Signature Packaging

Xrite Shrink wrap

To order products call us toll free at
1 800 690 5110

If you don't find what you are looking for call us. We may have it!

Disclaimer: This publication is not sanctioned or approved by any manufacturer or trade name listed. Packaging Equipment and Parts, Inc. is not an authorized distributor or representative for the following manufactures: Shanklin®, Orion®, Hanagata®, Weldotron®. See our legal statement for more information.

2016 MTB-SLB H0T KNIFE L-BAR SEALER

FILM CRADLE & SEPERATOR ASSBLY
BRAKE	10-54195
CRADLE MOUNTING BOLTS (THUMBNUTS)	540-43-32
FILM POSITIONING COLLARS	10-36466
ROLLER	10-36458-04
ROLLER	10-36458-05

SEAL ARM ASSEMBLY
ARM ASSEMBLY COMPLETE	10-54354
ARM BRACKET	10-54383
BLADE, FRONT	10-54397-02-C
BLADE, SIDE	10-54397-01-C
CARTRIDGE HEATER- FRONT	641-01-20
CARTRIDGE HEATER- SIDE	641-01-16
CLOSER ASSEMBLY	570-10-28
CLOSER SPRING	562-70-29-01
HOLD DOWN 5.75 X 0.5 THREE HOLE	10-54391-02
HOLD DOWN 5.75 X 0.5 TWO HOLE	10-54391-01
HOLD DOWN 7.25 X 0.5 FOUR HOLE	10-54391-03
FILM CLAMP HOLDER, SIDE	10-54438
FILM CLAMP HOLDER, FRONT	10-54432
LONG ARM WIRE COVER	10-54390
MAGNET (2 ROUND MAGNETS)	640-40-10
MAGNET SQUARE TYPE WITH RECTIFIER	640-40-09
MOUNTING BLOCKS	10-54425
NOMAX PAD 6 FOOT LONG (OBSOLETE)	10-36497 (OBSOLETE)
PAN HEAD MACHINE SCREW 8-32 X 1/2	521-04-01-22
PAN HEAD MACHINE SCREW 8-32 X 5/16	521-04-01-21
PERFORATOR	10-50932
PHENOLIC SHIELD FRONT OUTSIDE	10-54430
PHENOLIC SHIELD FRONT INSIDE	10-54431
PHENOLIC SHIELD SIDE FRONT	10-54439-01
PHENOLIC SHIELD SIDE REAR	10-54439-02
SEALING ARM FRAME	10-54360
SHORT ARM WIRE COVER	10-54363
SWITCH BRACKET BOTTOM	10-54385

FRONT HOLDER COVERS (not teflon coated)	10-54429 (10-54440-C)
FRONT HOLDER COVERS (not teflon coated)	10-54434 (10-54440-C)
SIDE HOLDER COVER (not teflon coated)	10-54436 (10-54440-C)
SIDE HOLDER COVER (not teflon coated)	10-54435 (10-54440-C)
BLADE HOLDER ASSEMBLY COATED (above all)	10-54440-C

ELECTRICAL
CAPACITOR (MAGNETS)	632-21-22-52-06
FUSE HOLDER- FRONT PANEL	10-21634
MAIN POWER CORD	605-72-43
MAIN POWER FUSE	600-62-27
SWITCH LIMIT ACTUATOR	610-18-22
SWITCH, ON/OFF	610-14-30
RECTIFIER (MAGNETS)	635-70-29
RELAY CONTACTOR TOP	610-50-32
RELAY CONTACTOR BASE	600-30-31
RELAY, SOLID STATE	610-50-44
THERMOCOUPLE TYPE J	660-20-23
THERMOCOUPLE FEMALE PLUG	600-23-48
TEMPERATURE CONTROLLER DIGITAL	610-22-28
TERMINAL JUMPER	600-54-01
TIMER (CONVEYOR & MAGNETS)	10-54180-90
KNOB,TIMER	568-03-23

CONVEYOR ASSEMBLY
BELT, CONVEYOR	10-40243-02
BELT, TIMING	562-32-06
BRUSHES INCLUDING SPRINGS (2 IN KIT)	640-45-07-03-K
CRANK HANDLE	10-40133-20
CRANK HANDLE LIFT ROD	10-40238-02
DRIVE ROLLER	10-40236-02
DRIVE ROLLER ASSEMBLY	10-40241-20
DRIVE ROLLER BUSHING- PULLEY SIDE	10-40235-01
DRIVE ROLLER BUSHING, FRONT	10-40235-02
DRIVE ROLLER SHAFT	10-40226-02
DRIVE ROLLER SPROCKET	10-40260
IDLER ROLLER ADJUSTER BOLT, FRONT	10-40226-01
IDLER ROLLER ADJUSTER BOLT, REAR	10-40226-02
IDLER ROLLER(SLEEVE)REQUIRES BUSHING & SHAFT	10-40216-02
IDLER ROLLER BUSHING	560-67-03
IDLER ROLLER SHAFT	10-40215-02
LIFT ROD BUSHING	557-07-09
LIFT ROD COLLAR	560-50-44
LIFT ROD COLLAR	560-50-44
MOTOR	615-42-24
MOTOR SPROCKET	10-40274
SCISSOR JACK LIFT ROD	10-40237-02

PERFORATORS
PERFORATOR STAND ALONE UNIT	10-50925
PERFORATOR ASSEMBLY (MOUNTED TO MACHINE)	10-54761
PERFORATOR WITH PINS	10-54512
PERFORATOR BACK UP WHEEL	10-54519
COLLAR LOCKING, FOR PERFORATOR (2 REQUIRED)	557-07-10


Last updated: 06/05/2008	2002 PEP, Inc. All rights reserved Legal > Privacy notice