PEP - Packaging Equipment & Parts
Home Products About Us Contact Us Search
Clearance Meet Keith   Meet Matt Meet Marty
  Home > Products > Beseler® 2016 Gen III hot wire

Search for an aftermarket product

Or

Browse by product category

 **NEW**Over stock items-Make a Bid!
  § Shanklin® after market parts
  § Orion® after market parts
  § Hanagata® after market parts
  § Teflon® Tape
  § Pad & Tubing
  § Nichrome® Wire
  § Belts
  § Weldotron® 1600
  § Used Equipment
  § Allied/Audion®
  § O/K® Durable Tapers
  § Heaters
   § Weldotron® Tunnels
   § Beselerparts.net® Official parts department for Charles Beseler Corporation.
   § Tape cutting knives

Signature Packaging

Xrite Shrink wrap

To order products call us toll free at
1 800 690 5110

If you don't find what you are looking for call us. We may have it!

Disclaimer: This publication is not sanctioned or approved by any manufacturer or trade name listed. Packaging Equipment and Parts, Inc. is not an authorized distributor or representative for the following manufactures: Shanklin®, Orion®, Hanagata®, Weldotron®.  See our legal statement for more information.

 
2016 SEALER Gen III  
   
COMPONENTS ON SEAL ARM ASSEMBLY  
2016 SINGLE SEAL WIRE  (sold in six packs) 10-41690-22
BEARINGS, SEAL HEAD PIVOT BEARINGS 560-70-21
BOLTS, ADJUSTERS FOR mag/seal wire micro switches 527-65-40-01
BRASS NUT FOR ANCHOR SCREW AND POST 545-24-20-30
BRASS SCREW (seal wire anchor bolt mounted in tensioner) 524-24-71-30
PLASTIC WASHERS (brass  post mounting insulators) 548-24-13
SEAL HEAD COMPLETE 10-54356
SEAL WIRE CONNECTOR BLOCK IN TENSIONER 10-54409
SEAL WIRE CONNECTOR KIT 10-16201
SPRING, FOR TENSIONER ASSMY 562-70-17
STUD FOR SPRING MOUNTING 10-04613-01
THUMB NUT, BLACK PLASTIC (attaches seal wires) 568-03-03
TRANSITE INSULATOR 40" LENGTHS (under seal wires) 10-16041-18
WASHER, BRASS (under thumb nut & scew above) 548-24-19
 
FILM HOLDDOWNS  
FILM HOLDDOWN, COMPLETE           FRONT 10-54421
FILM HOLDDOWN, COMPLETE           SIDE 10-54423
SPRING FOR HOLDDOWNS 562-72-19
 
CLOSER (DOOR) ASSEMBLY  
CLOSER ASSEMBLY 10-40083
SPRING, ASISST 562-70-29-01
 
SEAL PAD ASSEMBLY COMPONENTS  
2016 SEAL PAD ASSEMBLY 10-54298
MACHINE SCREW 521-64-71-02
NYLOCK NUT 567-57-08
SEAL BED COMPONENTS  
SEAL BED SPRING 562-72-64
SEAL PAD             1" FOAM 36" LENGTH 10-50588-05
SEAL PAD             1" FOAM 45" LENGTH 10-50588-06
TEFLON SLEEVE MATERIAL 12" X 9 YARDS 573-56-64
TEFLON TAPE    2 1/2"  9 YARD ROLL 573-56-68
TEFLON TAPE      3/4" 36 YARD ROLL 573-56-17-01
TEFLON TAPE      3/4" 10 YARD ROLL 573-56-69
WASHER 548-72-64
 
MAGNET ASSEMBLY COMPONENTS  
BRACKET, MAGNET HOLDER 10-54244
MAGNET, 90V DC 640-40-09
 
CONVEYOR ASSEMBLY COMPONENTS MTB MODELS  
CONVEYOR ASSEMBLY COMPLETE 10-54242
BELT, CONVEYOR W/ LACING & CONNECTOR ROD 10-40243-02
BELT, TIMING  562-32-06
BRUSHES GLEASON/AVERY INCLUDES SPRINGS (2 IN A KIT) 640-45-07-03-K
CRANK HANDLE 10-40133-20
DRIVE ROLLER         ASSEMBLY 10-40241-20
DRIVE ROLLER         ROLLER 10-40220-02
DRIVE ROLLER         SHAFT 10-40236-02
DRIVE ROLLER BEARING (PULLEY SIDE) 10-40235-01
DRIVE ROLLER BUSHING (FRONT SIDE) 10-40235-01
DRIVE ROLLER SPROCKET 10-40260
IDLER ROLLER (sleeve only, requires shaft & bushings) 10-40216-02
IDLER ROLLER ADJUSTER BOLT- L - BRACKET     FRONT 10-40226-01
IDLER ROLLER ADJUSTER BOLT- L - BRACKET     REAR 10-40226-02
IDLER ROLLER BUSHINGS 560-67-03
IDLER ROLLER SHAFT 10-40215-02
LIFT ROD, (on scissor jack replace w/ lift screw as a set) 10-40237
LIFT SCREW (threaded rod for crank handle)  10-40238-02
LIFT SCREW BUSHING, BRASS 557-07-09
LIFT SCREW COLLAR 560-50-44
MOTOR, CONVEYOR 615-42-24
SPROCKET,  MOTOR  10-40274
 
GSM MODEL PRODUCT TRAY COMPONENTS  
FOR MODELS WITHOUT CONVEYOR  
BASE, FOR SLOTTED TUBE, BOLTS TO TRAY UNDERSIDE 10-40027
BOTTOM BASE THREADED, BOLTS TO SEALER CHASIS 10-40031
LIFT SCREW W/ PLASTIC KNOB (tray height adjuster) 10-40029
LOADING TRAY ASSY, W/O SPRING OR LIFT SCREW 10-40008
SPRING 562-72-43
TRAY, LOADING 10-40028
TUBE, SLOTTED ANGLE 10-40030
 
SEAL WIRE TEMP & BALANCE CONTROL  
LIMIT SWITCH (MONITOR WIRE) 610-18-23
KNOB, FOR MONITOR WIRE  568-30-02
MONITOR WIRE 10-16457
TEMP CONTROL ASSEMBLY "K TIMER" "MONITOR" 10-40014
 
ELECTRICAL COMPONENTS  
SWITCH, SEAL, MAGNET, CONVEYOR MICROSWITCH 610-18-22
BRUSHES MOTOR, GLEASON/AVERY W/ SPRINGS 640-45-07-03
CONTROLLER, BELT SPEED 10-54341
FUSE   1.5AMP FAST ACTING 600-62-27
FUSE   15AMP  MAIN 600-62-38
MAGNET 640-40-09
MAIN POWER CORD 605-72-43
MAIN SEAL HEAD WIRE LOOP FORM CHASIS TO SEAL HEAD 605-70-19
SWITCH, ON/OFF  610-14-30
RELAY  SOLID STATE 610-50-45
RELAY CONTACTOR, CUBE RELAY TOP ONLY 610-50-32
RELAY SOCKET, (BASE FOR CUBE) 600-30-31
TERMINAL JUMPER 600-54-01
TERMINAL STRIP 600-50-10
TIMER KNOB (ROUND) 568-03-23
TIMER, CONVEYOR AND MAGNETS 10-54180-92
TRANSFORMER, SEAL WIRES 640-10-71
TRANSFORMER, HOLE BURNER  
 
FILM SEPERATOR/CRADLE ASSBLY COMPONENTS  
BRAKE 10-54195
COLLAR LOCKING, FILM POSITIONING COLLARS 10-36466
CRADLE ASSEMBLY COMPLETE 10-41998-21
CRADLE MOUNTING BOLTS (THUMB NUTS) 568-20-05
ROLLER 10-36458-04
SEPARATOR TABLE ASSEMBLY    STAINLESS STEEL 10-57256
 
PERFORATORS  
PERFORATOR STAND ALONE UNIT 10-50925
PERFORATOR ASSEMBLY  COMPLETE   (MOUNTED TO MACHINE) 10-54761
PERFORATOR WITH PINS 10-54512
PERFORATOR NO PINS                           (BACK UP WHEEL) 10-54519
PERFORATOR WITH ROLLERS (COMPLETE ASSEMBLY) 10-41998-21
COLLAR LOCKING, FOR PERFORATOR   (2 REQUIRED) 557-07-10
 
HOLE  BURNER COMPONENTS  
Large Size   1/4" Hole 10-41265-25
Complete Unit HB-3
Extension Arm,Burner Slides In This Rack 10-41258
Glow Tip Standard Size  1/16" Hole 10-41265-20
Hole Burner Receptacle 600-11-02
O-Ring Height Adjuster 573-40-13
Post, Hexagon Mounting Post 10-41252
Thumb Screw For Holeburner Attachment 568-20-19
Thumbwheel,Black Plastic Knob 568-20-19

 
   

Last updated: 06/05/2008 2002 PEP, Inc. All rights reserved
Legal > Privacy notice