PEP - Packaging Equipment & Parts
Home Products About Us Contact Us Search
Clearance Meet Keith   Meet Matt Meet Marty
  Home > Products > Beseler® 2014 & 1913

Search for an aftermarket product

Or

Browse by product category

 **NEW**Over stock items-Make a Bid!
  § Shanklin® after market parts
  § Orion® after market parts
  § Hanagata® after market parts
  § Teflon® Tape
  § Pad & Tubing
  § Nichrome® Wire
  § Belts
  § Weldotron® 1600
  § Used Equipment
  § Allied/Audion®
  § O/K® Durable Tapers
  § Heaters
   § Weldotron® Tunnels
   § Beselerparts.net® Official parts department for Charles Beseler Corporation.
   § Tape cutting knives

Signature Packaging

Xrite Shrink wrap

To order products call us toll free at
1 800 690 5110

If you don't find what you are looking for call us. We may have it!

Disclaimer: This publication is not sanctioned or approved by any manufacturer or trade name listed. Packaging Equipment and Parts, Inc. is not an authorized distributor or representative for the following manufactures: Shanklin®, Orion®, Hanagata®, Weldotron®.  See our legal statement for more information.

 
2014  &  1913  L-SEALERS  
 
COMPONENTS ON SEAL ARM ASSEMBLY  
BEARINGS, SEAL HEAD PIVOT  560-70-06
BLOCK, INSULATOR   (front of side wire) 10-16047
BLOCK, INSULATOR   (in wire tensioners) 10-41327
BLOCK, SEAL WIRE MOUNTING  IN TENSIONER ASSMY 10-16047
BOLTS, ADJUSTERS FOR MAG/SEAL WIRE MICRO SWITCHES 527-65-40-01
CAM (for tensioners) 10-16048
CAM HANDLE 10-16049
GROUND STRAP (copper "C" plate at corner) 10-41686
GROUNDING BLOCK (right side anchor point of front seal wire) 10-36224
LIFTER BLOCK    (for seal wire) 10-36210
NUT, BRASS        (for anchor screw) 545-24-20-30
RTV CEMENT      (attaches transite strip) 573-10-02-01
SCREW, BRASS  (seal wire anchor bolt mounted in tensioner) 524-24-71-30
SCREW,               (attaches front seal wire at corner) 521-12-02-01
SEAL ARM 1913  (HEAD) ASSEMBLY COMPLETE 10-36235-13
SEAL ARM 2014  (HEAD) ASSEMBLY COMPLETE 10-36235-22
SEAL WIRE  CONNECTOR KIT 10-16201
SEAL WIRE 1913 (pack of 6 wires)        FRONT 10-41690-12
SEAL WIRE 1913 (pack of 6 wires)        SIDE 10-41690-11
SEAL WIRE 2014 (pack of 6 wires)        FRONT 10-41690-19
SEAL WIRE 2014 (pack of 6 wires)        SIDE 10-41690-18
SHAFT                 (for cam and spring) 10-16129
SPRING, FOR TENSIONER ASSEMBLY 562-70-17
STUD FOR TENSIONER SPRING MOUNTING 10-16145
TENSIONER ASSMY W/CAM, STUDS, SPRINGS, MOUNT  FRONT 10-41211
TENSIONER ASSMY W/CAM, STUDS, SPRINGS, MOUNT  SIDE 10-41212
THREADED ROD, (holds microswitch adjusting bolts) 10-36227-02
THUMB NUT, BLACK PLASTIC             (attaches seal wires) 568-03-03
TRANSITE INSULATOR 40" LENGHTS (under seal wires) 10-16041-18
WASHER, BRASS (under thumb nut & screw) 548-24-19
BRACKET FOR ELECTRICAL BOX ON SEAL ARM    (BOTTOM) 10-16149-01
BRACKET FOR ELECTRICAL BOX ON SEAL ARM    (TOP) 10-16149-02
COVER FOR ABOVE ELECTRICAL BOX 10-16150
 
 
FILM HOLD DOWNS  
FILM HOLD DOWNS, COMPLETE       FRONT         2014 10-41104-16
FILM HOLD DOWNS, COMPLETE       FRONT         1913 10-41104-09
FILM HOLD DOWNS, COMPLETE       SIDE              2014 10-41104-15
FILM HOLD DOWNS, COMPLETE       SIDE              1913 10-41104-02
SHOULDER BOLTS (for hold downs) 10-16449
SPRING (for holddowns) 562-72-47
 
HB-3  
ARM, EXTENSION ,  (burner slides in this rack) 10-41258
COVER , TOP  (metal bracket supports receptacle) 10-16148
COVER, BOTTOM  (metal shield for receptacle) 10-41326
GLOW TIP FOR HB-3           STANDARD TIP 10-41265-20
GLOW TIP FOR HB-3           LARGER "S" TIP 10-41265-25
HOLE BURNER RECEPTACLE (on seal arm) 600-11-02
HOLE BURNER PLUG 600-09-08
HOLEBURNER COMPLETE HB-3
KNOB, THUMBWHEEL  (BLACK PLASTIC)  ON HB-3 568-20-19
O-RING, HEIGHT ADJUSTER 573-40-13
POST, HEXAGON MOUNTING POST 10-41252
 
CLOSER (DOOR) ASSEMBLY  
CLOSER ASSEMBLY 570-10-28
BRACKET, (on seal head)  10-16107
BRACKET, SPRING HOLDER 10-40043
SPRING, ASSIST 562-70-29-01
 
SEAL PAD ASSEMBLY COMPONENTS  
SEAL PAD 1"    CHANNEL  FOR       1913    SIDE           10-50559-01
SEAL PAD 1"    CHANNEL  FOR       1913    FRONT 10-50558-01
SEAL PAD 1"    FOAM 36" LENGTH            (2014) 10-50588-05
SEAL PAD 3/4" FOAM 36" LENGTH            (1913) 10-16058-16
SEAL PAD COMPLETE W/ HOLDER, PAD, TAPE      SIDE        1913                                               10-41119-01
SEAL PAD COMPLETE W/ HOLDER, PAD, TAPE      SIDE        2014 10-50575-10
SEAL PAD COMPLETE W/ HOLDER, PAD, TAPE      FRONT    2014 10-50575-09
SEAL PAD COMPLETE W/ HOLDER, PAD, TAPE      FRONT    1913 10-41119-03
TEFLON SLEEVE MATERIAL 12" X 9  YARDS  573-56-64
TEFLON TAPE  3/4"    10 YARD ROLL 573-56-69
TEFLON TAPE  2 1/2"   9 YARD ROLL 573-56-68
TEFLON TAPE 3/4"     36 YARD ROLL 573-56-17-01
 
MAGNET ASSEMBLY COMPONENTS  
BOLT, MOUNTS SPRING AND PLATE TO BRACKET 531-66-73-01
BRACKET, CONTACT PLATE MOUNTING 10-50838
BRACKET, MAGNET HOLDER-           2014 10-53855
BRACKET, MAGNET HOLDER            1913                                      10-41206
MAGNET, 90V DC 640-40-10
NUT, NYLOCK 546-57-34
PLATE, CONTACT  (mounted to seal head) 10-50837
SPRING,                   (on contact plate) 562-72-66
WASHER 548-50-05
 
CONVEYOR ASSEMBLY COMPONENTS MB MODELS  
BEARING, DRIVE ROLLER  (pulley side) 10-40235-01
BELT,  TIMING  562-32-06
BELT, CONVEYOR  W/LACING & CONNECTOR ROD 10-40243
BRUSHES               VON WEISS/FASCO BRUSH SPRINGS 640+45-07-02
BRUSHES               VON WEISS/FASCO (requires springs) 640-45-07-01
BRUSHES  GLEASON/AVERY INCLUDES SPRINGS (2 KIT) 640-45-07-03-K
BUSHING, DRIVE ROLLER (front side) 10-40235-02
CONVEYOR ASSEMBLY COMPLETE 10-40211
CRANK HANDLE 10-40133-20
LIFT ROD, (on scissor jack replace with lift screw) 10-40237-01
LIFT SCREW  (threaded rod for crank handle) 10-40238-01
LIFT SCREW BUSHING, BRASS 560-50-44
LIFT SCREW COLLAR 557-07-09
MOTOR 615-42-24
ROLLER, DRIVE                                             10-40241
ROLLER, DRIVE SHAFT 10-40236
ROLLER, IDLER  (sleeve only, requires bushing & shaft)  10-40216
ROLLER, IDLER  BUSHINGS  (2) 560-67-03
ROLLER, IDLER ADJUSTER BOLT - L - BRACKET  FRONT 10-40226-01
ROLLER, IDLER ADJUSTER BOLT - L - BRACKET  REAR 10-40226-02
ROLLER, IDLER SHAFT 10-40215
SPROCKET,   MOTOR  10-40274
SPROCKET, DRIVE ROLLER  10-40260
 
GSM MODEL PRODUCT TRAY COMPONENTS  
    FOR MODELS WITHOUT CONVEYOR  
BASE, FOR SLOTTED TUBE, BOLTS TOTRAY UNDERSIDE 10-40027
BOTTOM BASE THREADED, BOLTS TO SEALER CHASSIS 10-40031
LIFT SCREW  W/ PLASTIC KNOB (TRAY HEIGHT ADJUSTER) 10-40029
LOADING TRAY ASSEMBLY, W/O SPRING OR LIFT SCREW 10-40008
SPRING 562-72-43
TRAY, LOADING 10-40028
 
ELECTRICAL COMPONENTS  
BRUSHES                   HOLDER BRUSH 6158-42-21-01
BRUSHES MOTOR      SPRINGS 640-45-07-02
BRUSHES MOTOR      VON WEISS/FASCO REQUIRE SPRINGS 640-45-07-01
BRUSHES MOTOR, GLEASON/AVERY WITH SPRINGS  KIT (2) 640-45-07-03-K
CAPACITOR, MAGNETS 632-21-22-52-06
CONTACT SWITCH, ADJUSTING DIAL ON FRONT PANEL 610-18-23
CONTACTOR, MERCURY  610-60-14
CONTROLLER, SPEED BELT 10-54341
FUSE 600-62-27
FUSE HOLDER 10-21634
INDICATOR LIGHTS 625-60-31
KNOB, K wire adjustment with notch on front  568-30-02
KNOB, TIMER (round) 568-03-23
MAGNET 640-40-10
MAIN SEAL HEAD WIRE LOOP FROM CHASIS TO SEAL HEAD 605-70-19
MOTOR, CONVEYOR    90 VDC 615-42-24
POWER CORD,  MAIN  605-72-43
RECTIFIER, MAGNETS 635-70-29
RELAY CONTACTOR, CUBE RELAY TOP ONLY 610-50-32
RELAY SOCKET, (base for cube) 600-30-31
 
SEAL WIRE TEMP & BALANCE COMPONENTS  
SWITCH, ACTUATOR  SEAL, MAGNET, CONVEYOR MICROSWITCH 610-18-22
SWITCH, DWELL SELECTOR , STD/POLY (2014 ONLY) 610-14-37
SWITCH, ON/ OFF  (2014)