PEP - Packaging Equipment & Parts
Home Products About Us Contact Us Search
PEP Photos Meet Keith Meet Ryan Meet Sarah Meet Marty
  Home > Products > Beseler® 1812 Hot Knife

Search for an aftermarket product

Or

Browse by product category

 **NEW**Over stock items-Make a Bid!
  Shanklin® after market parts
 Orion® after market parts
 Hanagata® after market parts
 Teflon® Tape
 Pad & Tubing
 Nichrome® Wire
 Belts
 Weldotron® 1600
 Used Equipment
 Allied/Audion®
 O/K® Durable Tapers
 Heaters
  Weldotron® Tunnels
  Beselerparts.net® Official parts department for Charles Beseler Corporation.
   Tape cutting knives   and other Taper Parts

  IPM Stretch wrapper parts

  Xrite® Shrink wrap

   Lantech®

To order products call us toll free at
1 800 690 5110

If you don't find what you are looking for call us. We may have it!

Disclaimer: This publication is not sanctioned or approved by any manufacturer or trade name listed. Packaging Equipment and Parts, Inc. is not an authorized distributor or representative for the following manufactures: Shanklin®, Orion®, Hanagata®, Weldotron®.  See our legal statement for more information.

 
1812   HOT KNIFE   L - SEALER  
 
SEAL HEAD COMPONENTS  
Actuator Adjuster Bolts  1/4-20 Bolt 3" Long  
Actuator Arm (Threaded Rod Above Seal & Magnet Switches) 10-36227-01
Bearing Flange, Seal Head 560-70-10-02
Bearing, Seal Head 560-70-21
Blade, side and heater assembly 10-54846-10
Blade, front and heater assembly 10-54846-20
Film Holddowns  Side  
Film Holddowns Front  
Rtv Cement For Transite Strip 573-10-02-01
Shoulder Bolts for Film Holddowns 10-16449
Springs for Holddowns 562-72-29
Transite Strip Between Seal Wires and Head 40" Cut To Fit 10-16041-18
 
PERFERATOR PARTS  
Perferator wheel with pins 10-41863
Perferator wheel no pins 10-50560
Collars for above 557-07-08
Bottom bar 10-41860-01
Top bar 10-41875-01
Springs 562-70-68
Brackets 10-50315
 
DOOR CLOSER COMPONENTS  
Closer Assembly 10-40083
Bracket (On Seal Head) 10-50175
Spring   (External Assist Spring) 562-70-29-01
 
SEAL PAD COMPONENTS  
Bolts, Seal Pad Spring Holder Bolts 521-64-71-02
Complete Assmy (Pad Holder,Tape, Pads, Springs,Keepers  1812 10-53112
Nut, Lock  546-57-08
Seal Pad 1" Foam 36" Long 10-50588-05
 
Spring,   (NEW) 562-72-66
Teflon Sleeve Material              (9 yard Length Cut to Fit) 573-56-64
Teflon Tape  3/4"    10 Yard Roll 573-56-69
Teflon Tape  3/4"    36 Yard Roll 573-56-17-01
Teflon Tape 2 1/2"    9 Yard Roll 573-56-68
Washer,  Left Side Of Front Pad (2 Required) 548-24-30
Washer,  Right Side Of Front Pad 548-24-25
 
CHASSIS MOUNTED COMPONENTS  
Film Cradle Roller 10-36458-03
Locking Tab For Separator Tray 10-50216
Magnet 640-40-09
Magnet Contact Plate  (On Seal Head) 10-50256
Seal Area Table Assembly 10-53110
Separator Tray (Product Loading Tray) 10-50209
Lift screw with plastic knob (tray height adjuster) 10-40029
receiver for lift screw above 10-50218
 
ELECTRICAL COMPONENTS  
Diodes Assembly Mounts On Thermostat (with harness) 10-50270
Fuse  1 Amp 600-62-27
Fuse 1.5 Amp 600-62-03
Fuse 20 amp 600-62-06
FUSE HOLDER & CAP  10-21634
 
Fuse Holder Main fuse  20 amp 10-21634
Lamp Red 625-60-29
Switch, MICRO SPDT for Magnet and Conveyor  610-18-22
Relay Solid State 610-50-44
Switch, On/Off       Tunnel and Sealer   610-14-30
Terminal Jumper 600-54-01
Terminal Strip 600-50-62
Thermocouple   (for digital thermostat) 610-22-29
Thermostat   (with probe)    (TUNNEL) 610-22-09
Thermostat Digital 610-22-28
Timer, Conveyor & Magnet 10-54180-90
 
TUNNEL COMPONENTS  
Bearing, Drive Roller 560-70-21
Belt, Conveyor  10-50065
Block, insulator for motor 10-50051
Chain 562-30-18
Conveyor Motor Brushes  (KIT 2 per Motor) 640-45-07-03-K
Curtains               Inner 10-50079-01
Curtains               Outer 10-50079-02
Flange, Bearing Holder      (4 Required) 560-70-10-02
Heater Element, Hot Plate Under Belt 640-60-60
Heater Element, Main Tunnel 640-60-66
Insulation  502-70-03
Master Link 562-30-17
Blower wheel  (squirrel cage)  NOTE: BUSHING MUST BE ADDED 620-52-05
Bushing for blower wheel 10-19891
Motor Blower (Insulator Block) 10-50051
Motor Blower (ONLY) 615-20-51
Motor Conveyor  615-42-21
Motor, Blower Assembly 10-40500
Plate, hot 10-50055
Power cord with plug  12/3 605-73-21
Ramp, hot belt    10-50056
Screws for ramp  (2) 538-23-12-13
Roller Drive 10-50311
Roller Idler 10-50312
Speed Controller,  Conveyor  10-54341
Sprocket, Conveyor Motor 10-19687
Sprocket, Drive Roller 10-50247
 
SEALER CONVEYOR COMPONENTS  
Bearing,  Drive Roller Front 10-40235-02
Bearing,  Drive Roller Rear 10-40235-01
Bearing, Idler Roller  (2 per  roller) 560-67-03
Belt, Conveyor Sealer 10-40243-03
Bracket, Idler Roller  (Front) 10-40226-01
Bracket, Idler Roller  (Rear) 10-40226-02
Chain  562-30-18
Conveyor Assembly 10-56940
Link  (Master)  562-30-17
Motor Brushes   (2 per kit) 640-45-07-03-K
Motor Conveyor  (with wire and connector) 10-40249
Motor Convetor 615-42-24
Roller Drive  10-56975
Roller Drive Shaft 10-56979
Roller, Idler  10-40216-03
Roller, Idler Shaft 10-40215-03
Speed Controller  (Conveyor) 10-54341
Sprocket, Motor 10-19687
Sprocket, Roller 10-56985

 
   

Last updated: 10/07/2010 2002 PEP, Inc. All rights reserved
Legal > Privacy notice