|
1720 2220 L SEALERS |
|
|
|
|
|
COMPONENTS ON SEAL ARM ASSEMBLY |
|
|
1720 SEAL ARM (HEAD) ASSEMBLY REPLACE |
|
|
1720 SEAL WIRE (six pack of wires) FRONT |
10-41690-03 |
|
1720 SEAL WIRE (six pack of wires) SIDE |
10-41690-01 |
|
2220 SEAL ARM (HEAD) ASSEMBLY COMPLETE MTB |
10-36235-16 |
|
2220 SEAL ARM (HEAD) ASSEMBLY COMPLETE EM |
10-36235-20 |
|
2220 SEAL ARM (HEAD) ASSEMBLY COMPLETE GSM |
10-36235-15 |
|
2220 SEAL ARM (HEAD) ASSEMBLY REPLACE |
|
|
2220 SEAL WIRE (six pack of wires) FRONT |
10-41690-15 |
|
2220 SEAL WIRE (six pack of wires) SIDE |
10-41690-01 |
|
BEARINGS, SEAL HEAD PIVOT BEARINGS |
560-70-06 |
|
BLOCK, LIFTER FOR SEAL WIRE |
10-36210 |
|
BLOCK, INSULATOR (in wire tensioners) |
10-41327 |
|
BLOCK, INSULATOR (front of side wire) |
10-16047 |
|
BOLTS (adjusters for mag/seal wire micro switches) |
527-65-40-01 |
|
CAM |
10-16048 |
|
CAM HANDLE |
10-16049 |
|
GROUND STRAP (copper "C" plate at corner) |
10-41686 |
|
GROUNDING BLOCK (right side anchor point of front seal wire) |
10-36224 |
|
MOUNTING SHAFT FOR TENSIONER CAM & SPRING |
10-16129 |
|
NUT, (THUMB) BLACK PLASTIC (attaches seal wires) |
568-03-03 |
|
NUT, BRASS FOR ANCHOR SCREW |
545-24-20-30 |
|
RTV CEMENT (attaches transite strip) |
573-10-02-01 |
|
SCREW, ATTACHES FRONT SEAL WIRE AT CORNER |
521-12-02-01 |
|
SCREW, BRASS (seal wire anchor bolt mounted in tensioner) |
524-24-71-30 |
|
SEAL WIRE CONNECTOR KIT |
10-16201 |
|
SPRING FOR TENSIONER ASSMY |
562-70-17 |
|
STUD FOR SPRING MOUNTING |
10-16145 |
|
TENSIONER ASSY W/ CAM, STUDS, SPRINGS, MOUNT SIDE |
10-41212 |
|
TENSIONER ASSY W/ CAM, STUDS, SPRINGS, MOUNT FRONT |
10-41211 |
|
THREADED ROD, (holds microswitch adjusts bolts) EM |
10-40130 |
|
THREADED ROD, (holds microswitch adjusts bolts) GSM/MTB |
10-36227-02 |
|
TRANSITE INSULATOR STRIP 40" LENGTHS (under seal wire) |
10-16041-18 |
|
WASHER, BRASS (under thumb nut & screw above) |
548-24-19 |
|
|
|
|
FILM HOLD DOWNS |
|
|
FILM HOLDDOWNS, COMPLETE 2220 FRONT |
10-41104-12 |
|
FILM HOLDDOWNS, COMPLETE 1720 FRONT |
10-41104-04 |
|
FILM HOLDDOWNS, COMPLETE SIDE |
10-41104-03 |
|
SHOULDER BOLTS FOR HOLDDOWNS |
10-16449 |
|
SPRING FOR HOLDDOWNS |
562-72-47 |
|
TEFLON SLEEVE MATERIAL 12" X 9 YARDS |
573-56-64 |
|
|
|
|
HB-3 |
|
|
HOLEBURNER COMPLETE |
HB-3 |
|
GLOW TIP FOR HB-3 SANDARD TIP |
10-41265-20 |
|
GLOW TIP LARGER "S" TIP |
10-41265-25 |
|
HOLEBURNER RECEPTICLE (on seal arm) |
600-11-02 |
|
COVER, (top metal bracket supports recepticle) |
10-16148 |
|
COVER, (bottom metal shield for receepticle) |
10-41326 |
|
THUMBWHEEL, (black plastic knob on HB-3) |
568-20-19 |
|
POST, (hexagon mounting post) |
10-41252 |
|
EXENSION ARM, (burner slides in this rack) |
10-41258 |
|
O-RING, HEIGHT ADJUSTER |
573-40-13 |
|
|
|
|
CLOSER (DOOR) ASSEMBLY/ COUNTER WEIGHT |
|
|
CLOSER ASSEMBLY MTB |
10-40168 |
|
CLOSER ASSEMBLY EM |
10-40163 |
|
CLOSER ASSEMBLY GSM |
570-10-28 |
|
COUNTER WEIGHT SUPPORT ROD, (hooks) |
10-40094 |
|
COUNTER WEIGHT EM |
10-40126-02 |
|
COUNTER WEIGHT MTB |
10-40126-01 |
|
LOWER BRACKET (multi-hole closer mount) |
10-36216 |
|
SPRING, ASSIST GSM ONLY |
562-70-29-01 |
|
|
|
|
SEAL PAD ASSEMBLY COMPONENTS |
|
|
1720 SEAL PADS- OBSOLETE-must retrofit 2220 pad assemblies |
|
|
2220 SEAL PAD COMPLETE WITH HOLDER, PAD TAPE FRONT |
10-50575-03 |
|
2220 SEAL PAD COMPLETE WITH HOLDER, PAD TAPE
SIDE |
10-50575-04 |
|
SEAL PAD 1" FOAM 36" LENGTH |
10-50588-05 |
|
SEAL PAD 1" FOAM 45" LENGTH |
10-50588-06 |
|
SEAL PAD 3/4" FOAM 36" LENGTH (1720) |
10-16058-16 |
|
TEFLON TAPE 2 1/2" 9 YARD ROLL |
573-56-68 |
|
TEFLON TAPE 3/4" 10 YARD ROLL |
573-56-69 |
|
TEFLON TAPE 3/4" 36 YARD ROLL |
573-56-17-01 |
|
|
|
|
MAGNET ASSEMBLY COPONENTS |
|
|
MAGNET |
640-40-06 |
|
BRACKET, MAGNET HOLDER |
10-41340 |
|
CONTACT PLATE (mounted to seal pad) |
10-50834 |
|
BRACKET, CONTACT PLATE MOUNTING |
10-50835 |
|
SPRING, (on contact plate) |
562-72-66 |
|
BOLT, (mounts spring & plate to bracket) |
531-66-73-01 |
|
WASHER |
548-50-05 |
|
NUT, NYLOCK |
546-57-34 |
|
|
|
|
CONVEYOR ASS'BLY COMPONENTS MB MODELS |
|
|
BEARING, DRIVE ROLLER |
560-15-09 |
|
BELT, CONVEYOR ,W/LACING & CONNECTOR ROD |
10-36230 |
|
BELT, TIMING |
562-32-01 |
|
BOLT, ADJUSTER FOR TENSION ASSY |
527-65-40-01 |
|
BRUSHES FOR CONVEYOR MOTOR |
640-45-11 |
|
CRANK HANDLE |
10-16591-02 |
|
LAG TAPE FOR ROLLER |
10-16788 |
|
LIFT ROD, (on scissor jack replace with lift screw) |
10-36290 |
|
LIFT SCREW (threaded rod for crank handle) |
10-41263 |
|
LIFT SCREW BUSHING, BRASS |
10-36229 |
|
LIFT SCREW COLLAR |
557-07-09 |
|
MOTOR |
615-40-11 |
|
MOTOR MOUNTING BRACKET |
10-54176 |
|
NUT, (ANCHOR) FOR ADJUSTER |
10-36181 |
|
ROLLER, DRIVE |
10-36460-01 |
|
ROLLER, IDLER |
10-36459-01 |
|
SPROCKET, DRIVE ROLLER |
562-22-07 |
|
SPROCKET, MOTOR |
562-22-06 |
|
|
|
|
GSM MODEL PRODUCT TRAY COMPONENTS |
|
|
LOADING TRAY W/O SPRING OR LIFT SCREW |
10-16325-04 |
|
LOADING TRAY HEIGHT ADJUSTER |
10-16207-01 |
|
HANDLE, HEIGHT ADJUSTER |
10-16243-02 |
|
BASE, CHANNEL ASSMY |
10-41499 |
|
BASE, BOTTOM THREADED, (bolts to sealer chassis) |
10-36325 |
|
SPRING, ASSIST |
562-70-32 |
|
|
|
|
ELECTRICAL COMPONENTS |
|
|
BRUSHES, MOTOR |
640-45-11 |
|
CIRCUIT BREAKER, CONVEYOR |
610-70-03 |
|
CIRCUIT BREAKER, MAIN POWER |
610-70-10 |
|
CONTROLLER, BELT SPEED |
10-54342 |
|
LIGHT, INDICATOR 120 VOLT |
625-60-31 |
|
LIGHT, INDICATOR 220 VOLT |
625-60-30 |
|
MAGNET |
640-40-06 |
|
MAGNET, CAPACITOR, |
632-21-22-52-06 |
|
MAGNET, RECTIFIER, |
635-70-29 |
|
MOTOR, CONVEYOR |
615-40-11 |
|
RELAY CONTACTOR |
610-50-04 |
|
SWITCH, SEAL,MAGNET,CONVEYOR MICROSWITCH |
610-18-22 |
|
SWITCH. ON/OFF |
610-14-09 |
|
TERMINAL JUMPER |
600-54-01 |
|
TERMINAL STRIP 16 PIN DRAWER |
600-50-44 |
|
TERMINAL STRIP 9 PIN UPPER DECK |
600-50-10 |
|
TERMINAL STRIP 4 PIN FOR RECTIFIER |
600-50-06 |
|
KNOB, TIMER (round) |
568-03-23 |
|
TIMER, CONVEYOR AND MAGNETS (EM UP DWELL) |
10-54180-91 |
|
TRANSFORMER, HOLEBURNER |
640-10-35 |
|
TRANSFORMER, SEAL WIRES |
640-10-29 |
|
|
|
|
SEAL WIRE TEMP & BALANCE COMPONENTS |
|
|
BALAST WIRE TEMP EQUALIZER JUMPER |
NONE ON 2220/1720 |
|
TEMP CONTROL ASSEMBLY "K TIMER" "MONITOR" |
10-40014 |
|
MONITOR WIRE |
10-16457 |
|
SWITCH, CONTACT ADJUSTER DIAL ON FRONT PANEL |
610-18-23 |
|
KNOB, K WIRE ADJUSTMENT WITH NOTCH FRONT |
568-30-02 |
|
|
|
|
FILM CRADLE/ SEPERATOR TRAY ASSEMBLY |
|
|
BRACKET, FOR FILM OPENING ROD |
10-50551 |
|
BRAKE |
10-50554 |
|
COLLAR, FILM POSITIONING |
10-36466 |
|
COLLAR, FOR ROLLER INSTALLATION |
557-07-09 |
|
CRADLE TIE ROD SUPPORT |
10-16615-03 |
|
FILM CRADLE ASSEMBLY |
10-41407 |
|
KNOB, BLACK PLASTIC FOR OPENING ROD POSITION |
568-20-05 |
|
PLATE, FRONT ROLLER MOUNT |
10-36389 |
|
PLATE, REAR |
10-36390-01 |
|
ROD, FILM OPENING |
10-50553-02 |
|
ROLLER |
10-36458-01 |
|
ROLLER MOUNTING BRACKET |
10-16441 |
|
SEPARATOR TRAY STAINLESS STEEL |
10-40175-21 |
|
|
|
|
EM MODEL ADDITIONAL COMPONENTS |
|
|
BOLT, CRANK ARM TO MOTOR |
527-32-73-01 |
|
BRACKET, MOUNT FOR TDC DETECH SWITCH |
10-41434 |
|
BRAKE, ASSEMBLY,1994 AND OLDER MUST UP GRADE TO |
562-44-01 |
|
CLAMP, HEIGHT ADJUSTER PART OF CLOSER ASSEMBLY |
|
|
CLOSER ASSEMBLY |
10-40163 |
|
COVER, SAFETY COVER OVER MOTOR & CRANK ASSUME |
10-50842 |
|
CRANK ARM ASSEMBLY, ON DRIVE MOTOR |
10-50840 |
|
CRANK ARM HUB |
10-41632 |
|
MOTOR, HEAD DRIVING |
615-42-20 |
|
SCREW, THUMB PART OF CLOSER ASSEMBLY |
|
|
SWITCH, INTERLOCK, ON SAFETY COVER |
610-10-19 |
|
BUTTON, MUSHROOM HEAD AND SWITCH |
610-30-02 |
|
SWITCH, PALM |
610-18-05 |
|
SWITCH, TDC DETECTOR SWITCH |
610-18-38 |
|
SWITCH, TOGGLE AUTO/SEMI ON CONTROL PANEL |
610-10-15 |
|
SWITCH, UP DWELL START UP, ON SEALER TOP DECK |
610-18-22 |
|
TIMER, UP DWELL |
10-54180-91 |
|
TRANSFORMER, STEP-DOWN |
640-10-48-01 |
Search
for an aftermarket product
To order products call
us toll free at